2K-Pack sealing slurry for swimming pool outdoor concrete area Gray SL430 5-20Kg
- 64,90€
- 64,90€
- Unit price
- 12,98€ per kg incl. VAT
approx. 1600 g/m²Consumption
How much do I need?
Required amount:
--
The calculated amount is a guide. Actual consumption depends greatly on the substrate.
Already thought about the right accessories?
-
Pre-cleaner for Concrete Garage Pool Substrate Preparation surface Before Painting Cleansing Effect W810 5-10L
22,90€
-
Acid Etching surface Preparation for better adhesion of W700 Floor coating paint for concrete and for W702 2-Pack Epoxy Resin Floor Coating Paint Garage Concrete W800 - 10L
29,90€
-
2-Pack Epoxy Resin Mortar Grout Paving Joint Concrete Repair Mortar W757 - 5-20Kg
49,90€
-
Pool Primer SL708 – Special Adhesion Primer for Pool Paint 1–10 kg
19,90€
-
Swimming Pool Paint Coating SL400 1-20L
24,90€
-
2-Pack Swimming pool paint SL450 2,5-20Kg
54,90€49,90€
Description
- Extremely hard-wearing | Made in Germany
- Consumption / coverage: 1.6 kg/m2 per coat (2 coats recommended)
- Waterproofing swimming pools and as a substrate preparation for swimming pool paint
- Sealant is extremely waterproof, weather resistant and scratch resistant
- Sealing slurry protect concrete from chemicals and acids
- Optimal for swimming pools, concrete cisterns, ponds, fountains, sauna pools.
- Adheres to tiles, concrete, cement, formwork blocks/shuttering blocks
- Sealing compound can be easily applied with a smoothing trowel
- Mixing ratio is 3:1 (powder component:liquid component)
- Note: apply thinly and evenly
Product data
Product Description:
Flexible Sealing slurry SL430 is a 2-component sealing slurry based on cement, mineral fillers, special additives and synthetic polymers. Due to the high content of synthetic resins, SL430 adheres perfectly to a wide variety of surfaces and after drying creates a flexible and impermeable protective layer.SL430 is fiber reinforced, does not cause corrosion of metals and after curing it becomes resistant to low temperatures and chlorine.
SL430 2-Pack Swimming Pool Sealing Slurry and SL450 2-Pack Swimming Pool Coating form a perfectly matched composite system.
SL430 primarily performs the sealing function and serves as an adhesion promoter for SL450
SL450 provides a beautiful look and pleasant feel.
On mineral substrates (e.g. tiles, concrete, cement), both products are always required to reliably seal the pool.
Consumption / coverage: 1.6 kg/m2 per coat (2 coats recommended)
Mixing ratio:
3 parts powder component : 1 part liquid component
Recommended add-on products:
Product information
This 2-component epoxy slurry is used to seal swimming pools and as a substrate preparation for SL 450 2-Pack Swimming Pool Paint.
Hazard statements
2-Pack Swimming Pool Sealing Slurry - Liquid (Kom.A)
The mixture is classified as non-hazardous according to Regulation (EC) No 1272/2008 [CLP].
2-Pack Swimming Pool Sealing Slurry - Powder (Com.B)
Causes skin irritation. / May cause allergic skin reactions. / Causes serious eye damage. / May cause respiratory irritation.
Keep out of the reach of children. / Wear protective gloves / protective clothing / eye protection / face protection / In case of contact with skin or hair: Take off immediately all contaminated clothing. Wash skin with water or take a shower. / In case of contact with eyes: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. / Immediately call poison center or doctor / Wash contaminated clothing before wearing again. / Dispose of contents / containers to hazardous waste collection point.
