Hardener for WO-WE epoxy resin PAINT W705 0.225-1.8 kg

Härtekomponente 2K

Kompatibel mit SL450/W702/W712

Abriebfest

9,90€
9,90€
Unit price
44,00€  per  kg

inkl. MwSt.

Size: 225g (for 2.5Kg epoxy resin set)

Kostenloser Versand in DE!
Bestellen SIe jetzt und erhalten Sie ihre Ware innerhalb von wenigen Tagen kostenlos!

10 customers are viewing this product
  • The epoxy hardener is intended to be mixed with colored epoxy resin to create a solid substance with high strength and excellent adhesion and coating properties.
  • Compatible with all colored epoxy resins from the WO-WE brand: SL450 2K pool paint, W702 2K epoxy resin garage paint, W712 2K tile paint, W735 2K balcony paint, W757 2K epoxy resin mortar
  • The mixing ratio is 1 to 10.
  • Available in 4 sizes for epoxy resin: 2.5kg, 5kg, 10kg, 20kg.
  • The combination of the curing agent with the epoxy resin ensures the formation of a coating that is resistant to abrasion, moisture and UV rays.
Signal word: Danger Health hazard warnings H318 Causes serious eye damage. Additional hazard characteristics: none Safety instructions prevention P233 Keep container tightly closed. Safety instructions reaction P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P337 + P317 If eye irritation persists: Get medical help.

KNOWN FROM

FAQ

Our customer service is available from Monday to Friday from 9:00 AM to 6:00 PM.

Average response time: 24 hours

LEARN MORE

Optimal Processing Conditions

  • Optimal processing conditions are between 15 - 25°C and a relative humidity of 30 - 60%.
  • High temperatures and low humidity shorten the drying time, while low temperatures and high humidity extend the drying time.
  • Do not process in direct sunlight to avoid too rapid drying of the paint and the formation of bubbles on the surface.
  • Do not paint when it is windy to prevent dust from settling on the surface before it dries.

Which tool is the right one?

  • For water-based paints, acrylic varnishes: flock roller or a short-pile lambskin roller, brush with synthetic or artificial fiber bristles
  • For solvent-based paints and varnishes: short-pile rollers (for example Vestan rollers) that do not trap air, natural bristle also called China bristle
  • For floor coating: lint-free paint roller
  • For facades: masonry brush, also called painter’s brush, or a simple paint roller
  • For PU varnish: paint rollers made of mohair, pile, velour, smooth felt, Royal, Rolloplan. Foam rollers are unsuitable!

How do you clean tools?

It depends on the materials you have worked with:

  • If it was a water-based product – you can manage with water
  • If it was solvent-based – use a universal thinner

Cleaning tools contaminated with epoxy resins is a bit more complicated. You should always weigh up cost vs. benefit:

  1. Cleaning brushes, rollers, mixing cups, etc., is not worth it. The cost of cleaning agents is already significantly higher than using new tools. For simple tools, it is better to let them harden and use new ones.
  2. When cleaning expensive tools, you should keep in mind that work equipment must never be cleaned with solvents or thinners. Even the smallest traces of solvents on the tools can prevent the epoxy resin from curing in your next project. In this case, all your work would be in vain.

Why is the paint or oil not drying?

Possible reasons:

  • At temperatures below +15°C / above +25°C and humidity over 70%, the drying time is extended
  • A thick layer of paint takes longer to dry
  • Products such as cleaners or degreasers can slow down the drying time
  • Both components of the epoxy paint are poorly mixed or incorrectly distributed

The surface is still sticky after a few days of drying. What can I do?

Possible reasons:
If the paint was applied thickly or the excess oil was not removed from the surface, the wood may remain sticky.

What to do:
You can use a soda lye with warm water or sand the surface mechanically and then reapply the paint or oil.

Customer Reviews

Based on 5 reviews
80%
(4)
20%
(1)
0%
(0)
0%
(0)
0%
(0)
D
David Meier
Schnelle Aushärtung, perfektes Finish

Ich habe den W705 für eine Bodenbeschichtung verwendet, und die Aushärtung war ideal. Nach wenigen Stunden war die Fläche bereits stabil, und nach der vollständigen Durchhärtung ist sie extrem belastbar. Ein hochwertiges Produkt!

R
Raphael König
Perfekter Härter für Epoxidharz

Ich habe den W705 mit einem farbigen Epoxidharz verwendet, und die Aushärtung war absolut zuverlässig. Die Mischung ließ sich leicht anrühren, und das Ergebnis ist extrem stabil und widerstandsfähig. Sehr empfehlenswert für alle, die langlebige Oberflächen möchten!

M
Marco Fischer
Langlebige und stabile Beschichtung!

Dank des W705 konnte ich eine stark beanspruchte Fläche mit farbigem Epoxidharz versiegeln. Der Härter sorgt für eine extrem harte und widerstandsfähige Oberfläche – genau das, was ich gesucht habe. Klare Kaufempfehlung!

U
Ulrich
Top Qualität für professionelle Ergebnisse

Ich habe mit diesem Härter eine Werkbank beschichtet, und das Ergebnis ist beeindruckend. Die Mischung hat sich problemlos verarbeiten lassen, und das Endresultat ist extrem widerstandsfähig gegen Kratzer und Chemikalien. Jederzeit wieder!

O
Olaf
Härtet perfekt aus und ist leicht zu verarbeiten!

Ich habe schon einige Härter ausprobiert, aber dieser ist mit Abstand der beste. Kein Nachkleben, keine Blasen – das Epoxidharz wurde super hart und hat eine gleichmäßige, glänzende Oberfläche. Ich bin absolut zufrieden!

YOU MIGHT ALSO BE INTERESTED IN